Conventional Outdoor Detector IP67, Fixed temperature of 87 ° C, Class CS – 6297 Aritech™

Conventional Outdoor Detector IP67, Fixed temperature of 87 ° C, Class CS – 6297 Aritech™
Fixed temperature alarm level
Conforme ATEX (6295 Y 6296)
For outdoors (IP67)

General
Thermal detectors are normally used in rooms where the temperature can be expected to rise rapidly in the event of a fire., or in places where smoke detectors cannot be used. The Serie 6000 It is created to be used in areas of high humidity both indoors and outdoors.

Fixed temperature alarm level
Detectors series 600 are conventional fixed temperature thermal detectors, for example they will give you an alarm within a temperature range conforming to the EN54-5 standard:2000. The sensing element is a bimetallic switch with a protection with a protection against heat. One LED on the detector (not available in the 6298) will illuminate when the detector is activated. All detectors include a remote indicator output.

The following models are available (Temperature response, temperature class and range according to EN54-5):

• 6295, 57°C, clase A2 S (54 a 70°C)
• 6296, 72°C, clase B S (69 a 85°C)
• 6297, 87°C, clase C S (84 a 100°C)
• 6298, 117°C, class E S (114 a 130°C)

Functioning
All detectors are latched, This means that they are not automatically restored if the temperature after the alarm, falls below the alarm threshold.
The detector LED and the remote connected LED will remain on until a reset is performed from the C.I.E..

Installation
All electronic components are mounted in a gray weather-protected housing equipped with the supplied terminal block.
The connection base has 3 cable entries. Supplied with 3 clamping bushings and a silicone gasket for IP67 protection.
All detectors are provided with three pairs of movable leads with female push-in connectors for connecting zone line wires (entry / Exit) and remote indicator.