Alarm Center for Mobile Telephony – AE/AX30TRI Aguilera Electronica

Description

Alarm Center for Mobile Telephony – AE/AX30TRI Aguilera Electronica

The AE / AX30TRI alarm control panel is an external fire control and repeating alarm control panel for three different operators. It is basically made up of:
-Power supply and battery charger.
-Fire detection loop.
-Automatic extinguishing control circuit that provides a monitored output to activate a solenoid valve.
-Relay output (24 V).
-Departure from 12 Vcc (500 mA.) for various uses outside the central.
-Control of 30 external alarm inputs, normally open or normally closed selectable via switch,
(departures from 30 alarms via potential-free relays normally open or closed selectable by means of a selector).
-For the 14 first outputs plus fire alarm and general fault alarm, there are three Sub-D connectors for 37 pins to be used independently by each operator.
-This information is repeated simultaneously on all three connectors.
-For the 16 The remaining outputs are provided with a single Sub-D connector for 37 pines.
-Repetition by means of two switching relays 2 A voltage-free inputs 1 Y 30.
-Control of 1 FIRE output and 1 GENERAL FAULT output normally closed through the 3 first Sub-D connectors of 37 pines.
-Switched relays 2 A free of tension for:
-Fire alarm.
-General fault alarm (normally excited).
-Selectable ventilation stop with fire level 1 or with fire level 2.
-Optical and acoustic signals, in addition to the controls necessary to operate the installation.

Download datasheet

Download technical manual

Additional information