230V Methane Detector – AE09/GM Aguilera Electronica

Description

230V Methane Detector – AE09/GM Aguilera Electronica

Microprocessed gas detector, designed according to UNE-EN regulations 50 194, allows to detect the presence of METHANE gas (natural gas or city gas).
The detector is calibrated to warn of danger when a gas concentration is reached that exceeds the 10% Lower Explosive Limit (L.I.E.)1 .
When the concentration level is again below the 10% L.I.E., for a specified period of time, the detector will reset automatically.
The detector is listed as "Type A Apparatus", since it provides a visual and audible alarm and an output that can act directly or indirectly on a cutting device and / or other auxiliary devices.

Dispose of:
• Green power indicator light and detector in service.
• Red alarm indicator light.
• Orange fault indicator light.
• Acoustic indicator for pre-alarm and alarm by piezoelectric buzzer.
• Relay output by NO contacts, C and NC voltage free.
• Internal pushbutton for test run cycle.
The supply voltage of the detector varies according to the selected model.
AE09/GM 230V AC
AE09/GM-12 12V DC
AE09/GM-24 24V DC

The detector needs to be powered for proper operation.
When the detector is powered, requires a period of warm-up and stabilization of the sensor 120 seconds,
during this time the detector is not able to detect the presence of METHANE gas.

Download Technical Data Sheet

Additional information