Water Leak Flood Detector, Composed of two Elements: Probe or Sensor Element and Detector A 230V – AE98/IN220 Aguilera Electronica

0 out of 5

53,85 *VAT included*

Power supply with encapsulated transformer

.

.

Availability: Out of stock SKU: AE98/IN220

Description

Water Leak Flood Detector, Composed of two Elements: Probe or Sensor Element and Detector A 230V – AE98/IN220 Aguilera Electronica.
Comparison circuit and analysis of the signal from the Probe, which determines the alarm status (flood) or rest.
The detector has independent indicator lights to present the operating and alarm states,
buzzer for acoustic warning in case of alarm and reversing relay with voltage-free contacts that switches on alarm.

PROBE
-Installs in a vertical position, with the part of the conductive printed circuit resting on the ground.
-To determine the alarm status, the water must be in contact with the probe terminals.
-It must be located in those places where it is anticipated that a water leak may exist and it wants to be controlled.
-On sloping soils, They will be located at the points where by fall the water tends to be stored.
-They can be installed hidden, since its function is to send information to the detector element.
-Feeding, tolerance, frequency: 230 you. +/- 10%, 50/60Hz
-Consumption: 2 W
-Protection fuse:F/ 0.125 A
-Maximum total connection cable length:50 meters.
-Probe connection cable: 2 threads x 0.75 mm2
-Maximum number of probes: 3
-Dimensions: 130 x 70 x 52 mm
-Detector:130 x 70 x 52 mm
-Probe: 60 x 40 x 21 mm
-Material: ABS

DETECTOR ELEMENT
-It is located on a vertical wall and in a visible place.
-There should be no elements that interfere with your vision or hearing of your sound signal.
-A connection to the network is required. 230 you. 50/60Hz for your power.
-The Probe and the Detector element, must be connected to each other by means of a 2 x 0.75 mm2
-The maximum number of probes that can be connected to a detector is 3. The maximum allowable cable length between all elements is 50 meters.
-The connection cable between the probe and the detector must not be installed in the same conduits that the cables run through. 230 V c.a.

 

Download Technical Data Sheet

Download installation manual

Additional information

Weight 1 kg
Dimensions 13 × 7 × 5 cm