CO detector (Carbon monoxide) DURPARK – DKDSCO Duran Electronica

Description

Detector DURPARK CO (Carbon monoxide) (0-300ppm) – DKDSCO Duran Electronica
Requires CO / NO2 Detector Base DKBADT

DURPARK CO and NO2 detectors communicate via three wires with their own protocol with the DURPARK control panel, allowing them to be addressed (1-16).

They are designed, especially for use in Parkings, with a new type of low-cost, high-performance electrochemical probe, that allows a useful life of up to 5 years (CO) Y 3 years (NO2), hardly maintenance. The kind of CO offers a range of 0-300 ppm and a resolution of ± 1ppm and that of NO2 a range of 0-20 ppm and a resolution of ± 0.5ppm.

Calibration and maintenance tasks have been simplified on the detector. Algorithms have been created for automatic zero and gain calibrations using software, as well as an algorithm and special hardware that allows to verify the sensitivity of the CO sensor without the need to apply gas. In the CO detector, the composition of its electrolyte is respectful with the environment. Its structural shape eliminates the risk of electrolyte leakage. It does not consume active materials in its electrodes during its operation, has a lower sensitivity to interfering gases, a long life, and good stability and precision.

There is a version with RS485 communication format and 4 threads that are compatible with the control panel DURGAS.

• Download Technical Data Sheet

DURPARK CO detectors are:

According to the STANDARD A 23.300:1984 according to Certificate Nº LOM 14MOGA3084. Certification of conformity (Homologation) of the Ministry of Industry, Energy and Tourism with CDM passwords-0080010 (DURPARK) and CDM-0090010 (DURPARK Mini).

Technology. Microprocessor and electrochemical sensor.

Supply voltage. From 9V to 15V DC.

Consumption. 14mA (repose) 24mA (in alarm).

Measurement range. of 0 a 300ppm CO y 0-20ppm NO2.

Resolution. ±1 ppm CO ± 0.5 ppm NO2.

Reproductivity. ± 1% and 3% Full scale respectively.

Linearity. linear across the entire scale. Calibration gas and recommended concentration. precise mixing 150 ppm CO + N2 150 ml/min.

Precise mixing 10 ppm de NO2 +N2 400ml/min.

Sensor life. >5 years under normal working conditions CO and 3 years NO2.

RH. of the 5% al 90% HR, no condensation.

Atmospheric pressure. ±10%. Work temperature. from –10ºC to + 60ºC.

Parallel communication (two versions).

3 threads, addressable own protocol (1 al 16)

4 DURPARK RS485 wires.

Degree of protection: IP20

Material: ABS. Weight: 146gr.

Installation height: 1,8/2m from the ground CO Y 40/50 cm from ground NO2.

Additional information

Weight	0,146 kg
Dimensions	9 × 9 × 4,2 cm