Conventional Siren – FAW350 Aritech™

The FAW350 is a wall mount LED beacon general purpose for fire alarm applications. It has a special base that contains all the wiring connections and allows easy removal / device placement. With a coverage pattern approved by EN54-23 of W-2.4-7.5, each FAW350 can be mounted up to 2.4 m tall and cover a square room of 7.5 x 7.5 m with one device.

The FAx350 beacons allow faster installation and maintenance thanks to an innovative mounting base. Disregarding the need for locking screws, these beacons use TimeSaver bases ™ of the series detectors 630. The heads simply lock to the base with a "twist and click" action, allowing them to be attached or removed at any time because the base is the only component that needs to be wired. As the need for cabling is reduced, naturally I also know reduce start-up time and costs.

FAx350 beacons use a specially designed lens that provides uniform light output over the specified coverage area. The frequency of beacon flash can be adjusted during installation, with a selection of 0.5Hz or 1Hz.

The mechanism to lock the device to the base can be activated if necessary. Once activated, a special tool is required to remove the beacon from the base.

Automatic sync
Tamper-proof locking mechanism
Shallow mounting base
Wired directly to the base
Selectable flash frequency
Operating voltage 17 a 60 VCC
Flash rate 0,5 Hz o 1 Hz
Physical dimensions 100 x 81 mm (Ø x D)
Net weight 215 grams
Operating temperature -25 until + 70 ° C
RH 5 a 95% no condensation
Indoor Environment,​
IP rating IP21
EN54-23 certification
Continuous Operation
Current consumption 20 mA a 0,5 Hz / 40 mA a 1 Hz
Automatic synchronization Phase start
Line monitoring input Polarized input
High impact polycarbonate housing
Housing color Red
Flash Color Red
Light coverage W-2.4-7.5
Mounting position Wall
Mounting height Up to 2,4 m
Ground cover Up to 7,5 x 7,5 m