Single Zone Monitor Module to Control Up to 20 Conventional Detectors and / or 10 Pushbuttons or as NO Signal Input, by zone - KAL714C Kilsen - Image 1

Single Zone Monitor Module to Control Up to 20 Conventional Detectors and / or 10 Pushbuttons or as NO Signal Input, by zone – KAL714C Kilsen

Single Zone Monitor Module to Control up to 20 Conventional Detectors and / or 10 Pushbuttons or as NO Signal Input – KAL710 Kilsen
Output Control Module with a Voltage Free Relay Provides a NO / C / NC Contact (1,2 A, 24VCC) – KAL730 Kilsen
0 out of 5

217,59€ *VAT included*

Kilsen KAL714 four-zone monitor module for control of up to 20 conventional detectors and / or 10 pushbuttons or as NO signal input, by zone

Availability: Out of stock SKU: KAL714C
Add to wish list

Description

Single Zone Monitor Module to Control Up to 20 Conventional Detectors and / or 10 Pushbuttons or as NO Signal Input, by zone – KAL714C Kilsen

Kilsen KAL714 four-zone monitor module for control of up to 20 conventional detectors and / or 10 pushbuttons or as NO signal input, by zone.

-The KAL700 series of modules includes a full range of interfaces for the control of inputs and outputs within UTC's fire detection systems of the KSA700 and FP1500 ranges.

-They are easy to install and supplied in IP55 housings. These modules allow the fire system to control the basic functions of a building in fire situations..

-Each loop of fire panels supports up to 125 addresses for input / output modules and up to 125 fire detector addresses.

-The KAL714C supports up to 20 conventional detectors or even 32 manual call points (MCP) by zone.

-This module can differentiate between alarms generated by detectors and those generated by push buttons., in mixed areas.

-The KAL714C module supplies power to detectors in conventional zones, from an external 24Vdc power supply and digitally communicates the status of the zone to the fire panel.

-The led indicator of each module, indicates the different states of the zone, as an alarm, communication breakdown or status.

  • Certified under EN54:18 and the CPD
  • Surface mount
  • Easy routing by switches
  • 24Vdc external power supply
  • Communication indication, alarm and module fault
  • Fully supervised conventional zone

It is part of the family of modules such as:

-Conventional zone

-Logic input module

-Extinguishing control module

-Loop insulators

-Manual call points

-Relay output module and supervised output

-Door retainer module

-Maximum consumption 80mA.

-Incorporates LED status indicator. IP55.

-Dimensions: 150x110x70mm.

Certificates: CE y CPR (EN54 starts 18).

 

 

Download Technical Data Sheet

 

 

Additional information

Weight 0,835 kg
Dimensions 19 × 14 × 7 cm