Module of a technical alarm input with 2 Line Alarm and Supervision Levels, with Connection of a NO or NC Contact – KAL760 Kilsen
105,10€ *VAT included*
Module of a technical alarm input with two alarm levels and line supervision
- Description
- Additional information
Description
Module of a technical alarm input with 2 Line Alarm and Supervision Levels, with Connection of a NO or NC Contact – KAL760 Kilsen
Module of a technical alarm input with two alarm levels and line supervision, with connection of an NO or NC contact, occupies one address in the loop, direct feed to loop.
The KAL700 series of modules includes a full range of interfaces for the control of inputs and outputs within UTC's fire detection systems of the KSA700 and FP1500 ranges.
They are easy to install and supplied in IP55 housings. These modules allow the fire system to control the basic functions of a building in fire situations..
Each loop of fire panels supports up to 125 addresses for input / output modules and up to 125 fire detector addresses.
- According to EN54:18 and the CPD
- Surface mount
- Easy routing by switches
- 24Vdc external power supply or through loop
- Communication indication, alarm and module fault
- Supervision via normally open contact
It is part of the family of modules such as:
-Conventional zone
-Logic input module
-Extinguishing control module
-Loop insulators
-Manual call points
-Relay output module and supervised output
-Door retainer module
-Includes LED status indicator. IP55.
-Dimensions: 150x110x70mm.
-Certificates: CE y CPR (EN54 starts 18).
Additional information
Weight | 0,370 kg |
---|---|
Dimensions | 15 × 11 × 7 cm |