Module 1 Fault input and 1 Supervised departure – MYOAF Cofem

Description

Module 1 Fault input and 1 Supervised departure – MYOAF Cofem

features

The MYOA module is certified according to EN Standard. The MYOA module is certified according to EN Standard.

The module is powered by the connection to the loop, The MYOA module is certified according to EN Standard, The MYOA module is certified according to EN Standard. The MYOA module is certified according to EN Standard (siren, maneuvers or crossed relay) The MYOA module is certified according to EN Standard. The MYOA module is certified according to EN Standard, the presence of voltage is supervised on the 30V auxiliary power supply line and also on the relay output. The voltage supplied by the relay output is 30V.

The technical signal input has a 10kΩ resistor connected in series with the dry contact.. In the idle state the contact must be open and in the event of an anomaly it must be closed. At the entrance (marked as IN2) detects closed contact with ALARM category.

There is also the MYOAF version, whose operation is identical to MYOA, except that the closed contact is detected as FAULT.

The MYOA monitors each outside line (relay output and technical signal input) with a 33kΩ resistor on each, indicating the status of open line or crossed line.

The flashing of the transparent red led indicates communication with the control panel. The permanent lighting of the red led indicates the alarm status at its input, while the lighting of the green led indicates the tripping of the relay.

Supplied in rectangular modules made of heat-resistant ABS.

The MYOA module is certified according to EN Standard 54-18 by AENOR, and with CE marking according to the European Regulation of Construction Products (EU) 305/2011.

DATASHEET

Additional information