Analogue Central of 4 Loops, 64 Devices per Loop – POLON 4200 – LOOK

Description

Analogue Central of 4 Loops, 64 Devices per Loop – POLON 4200 – LOOK

The POLON fire alarm control panel 4200 is designed to integrate all the interactive elements of the POLON fire alarm system 4000 addressable.

The control panel coordinates the operation of all units of the system and decides on the activation of a fire alarm, control of signaling equipment interoperability and fire protection, as well as the transmission of information to the monitoring center or supervision system.

The POLON control panel 4200 It is recommended for the protection of several premises (especially medium-sized buildings) like hotels, office buildings, banks, warehouses, historical buildings, buildings “smart”, etc.

The POLON control panel 4200 interoperates with model range detectors 4043 – no possibility to use interactive alarm variants – with such a possibility when using range detectors of models 4046. Analog Central 4 Loops, 64 Devices per Loop – POLON 4200 – LOOK

The POLON fire alarm control panel 4200 is designed to integrate all the interactive elements of the POLON fire alarm system 4000 addressable.

The control panel coordinates the operation of all units of the system and decides on the activation of a fire alarm, control of signaling equipment interoperability and fire protection, as well as the transmission of information to the monitoring center or supervision system.

The POLON control panel 4200 It is recommended for the protection of several premises (especially medium-sized buildings) like hotels, office buildings, banks, warehouses, historical buildings, buildings “smart”, etc.

The POLON control panel 4200 interoperates with model range detectors 4043 – no possibility to use interactive alarm variants – with such a possibility when using model range detectors 4046.

Supply voltage: principal 50Hz, 230V +10% – 15%

Supply voltage: en espera 24V 17Ah a 38Ah HP7-12 KOBE

Maximum current consumption at rest 0.4A

Maximum mains current consumption 0.8A

Maximum loop capacity 300nF

Maximum loop current 50mA (20mA)

Max current. for auxiliary devices 0.1A

Line elements installed in the detection lines analog type detectors 4043, 4046;

ROP-4001 Manual Call Points, ROP-4001H, ROP-4001M, ROP-4001MH; ADC-4001M adapters, ADC-4001;

sirens SAL-4001; input/output devices EKS-4001

multiple output devices EWS-4001;

multiple input devices EWK-4001

Potential-free supervised relay output

carga actual 1A/24V

Number of addressable lines 4

Number of alarming variants 14

Signaling lines (potential) 2

Number of detectors online 64

Auxiliary devices output current load capacity 500mA/24V

ADC-4001M current consumption from detection line 0,5, 1,33, 2,2, 2,5, 6,8, 16 mA (depending on the operating mode)

Current consumption by elements such as detectors, manual call points, signaling devices, EX, EWS, 130uA and 170uA in EWK-4001 (depending on the type of element)

Programmable outputs 8 relay 1A/24V; 1 signal line with a load capacity of 0.5A/24V; 1 signal line with a load capacity of 0.1A/24V;

Programmable inputs 2 monitoring inputs

Maximum resistance of detection line 2x100Ohm

Loop detection line type with ability to eliminate short circuits or wire breaks,

Compatibility with computer keyboard devices, computer, digital surveillance system, parallel indication terminals TSR-4000

Alarm stage I-st ​​confirmation time programming ranges 0-10min;

Fire alarm verification time 0-10min;

Alarm output delay time 0-10min;

Number of detection lines 4

Maximum number of online point detectors 64

Maximum number of beam detectors in line 64

Maximum number of manual online call points 64

Number of general alarm relay outputs 1 change

Number of addresses on a line 64

Number of detection zones 256

IP Ingress Protection 30

Operating temperature range -5oC to 40oC

Dimensions (mm) 483x393x190

Weight without battery approx.. 11kg

 

 

Download Technical Data Sheet

Operational, Maintenance and Documentation