Output Control Module with 4 Voltage Free Relays Provide NO / C / NC Contact (1,2 A, 24VCC) – KAL734C Kilsen
187,83€ *VAT included*
Output control module with 4 voltage-free relays providing an na / c / nc contact (1,2 a, 24vcc) programmable from the control panel
- Description
- Additional information
Description
Output Control Module with 4 Voltage Free Relays Provide NO / C / NC Contact (1,2 A, 24VCC) – KAL734C Kilsen
Single zone monitor module to control up to 20 conventional detectors and / or 10 pushbuttons or as NO signal input.
The KAL700 series of modules includes a full range of interfaces for the control of inputs and outputs within UTC's fire detection systems of the KSA700 and FP1500 ranges.
They are easy to install and supplied in IP55 housings.
These modules allow the fire system to control the basic functions of a building in fire situations..
Each loop of fire panels supports up to 125 addresses for input / output modules and up to 125 fire detector addresses.
- According to EN54:18 and the CPD
- Surface mount
- Easy routing by switches
- 24Vdc external power supply
- Communication indication, alarm and module fault
- 4 Normally open and closed contact outputs
It is part of the family of modules such as:
-Conventional zone
-Logic input module
-Extinguishing control module
-Loop insulators
-Manual call points
-Relay output module and supervised output
-Door retainer module
-Maximum consumption 100mA.
-Incorporates LED status indicator. IP55.
-Dimensions: 190x140x70mm.
Certificates: CE y CPR (EN54 starts 18).
Additional information
| Weight | 0,835 kg |
|---|---|
| Dimensions | 19 × 14 × 7 cm |
